Manual Autoclave Installation

1. Place unit on a sturdy level counter.
2. Measure out the proper amount of water according to model:
   
   • * The Valueklave 1730M = 10-12oz
   • * 2340M, 2540M, 2540MK = 12-15oz
   • * 3870M = 24-27oz
3. Pour the water in through the front door of
   the unit. This water should cover the bottom
   of the chamber up to the groove in the front.
4. If needed adjust the front leveling feet to achieve the necessary pitch.
5. Fill the Reservoir with distilled water
6. The unit is ready to operate